Skip to main content

New Catalyst 3850 can not join the stack, it show Lic_Mismatch

 

New Catalyst 3850 can not join the stack, it show Lic_Mismatch

Catalyst 3850 stackable with different License Levels?

show license right-to-use default

show license right-to-use summary


How to Configure RTU Licenses

Activating an Imaged Based License

SUMMARY STEPS

1. license right-to-use activate{ipbase |ipservices | lanbase} {all | evaluation all } [slot slot-number] [

acceptEULA]

2. reload [ LINE | at | cancel | in | slot stack-member-number | standby-cpu ]

3. show license right-to-use usage [ slot slot-number ]

DETAILED STEPS

Command or Action Purpose

Activates a type of image based

license. Activation can happen on all

license right-to-use activate{ipbase |ipservices | lanbase} {all | evaluation all }

[slot slot-number] [ acceptEULA]

Step 1

switches and also include the EULA

acceptance. Example:

Switch# license right-to-use activate ipservices all acceptEULA

OR

Example:

Switch# license right-to-use activate ipbase all acceptEULA

Switch# license right-to-use activate lanbase all acceptEULA






Comments

Post a Comment

Popular posts from this blog

Cisco UCS C Rack version CIMC issue with adobe flash player end of life

  Issue: can not open CIMC in the browser due to Adobe Flash no longer supported it affecting firmware ver 2.x Workaround: Uninstall current flash and Firefox, use flash_player 22.exe with Firefox ver 45 You can download it from here  https://drive.google.com/drive/folders/1oSoNuoCevCx00tQfT0eJLwaBEegmWJwE next step:  upgrade the firmware to ver3.x above NOTE: 2.0.4c and above you should be able to upgrade to 3.0.3f or 3.0.4 easily then you can goto 4.0 or 4.1 as required Don't upgrade to 3.0.3a, this version have a bug ver 3.x above using HTML5 After firmware upgraded: you need to download and install the latest Firefox that support HTML5 Firmware upgrade matrix https://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/c/sw/CIMC-Upgrade-Downgrade-Matrix/index.html =============================================================== Workaround 2: Run power shell script on FE laptop: Change IP, username and password on the script, before you run it Script: $cimcIP = &
Post a Comment
Read more

Upgrade Software On A Cisco Catalyst 3850 Series Switch Stack

  Upgrade Software On A Cisco Catalyst 3850 Series Switch Stack Set a new SW#1 as stand alone copy bin file using usb copy usbflash0:xxxxx.bin flash: New-SW01#request platform software package install switch all file flash:cat3k_caa-universalk9ldpe .16 .03 .08 .SPA.bin new auto-copy New-SW01#reload New-SW01# request platform software package clean connect the stack cable
Post a Comment
Read more

Recovering Fabric Interconnects When You Do Not Have Working Images on The Fabric Interconnect or The Bootflash

  Recovering Fabric Interconnects When You Do Not Have Working Images on The Fabric Interconnect or The Bootflash You can perform these steps when both or any fabric interconnect goes down during firmware upgrade, gets rebooted, and is stuck at the loader prompt, and you do not have working images on the fabric interconnect. Procedure Step 1 Reboot the switch, and in the console, press  Ctrl+L  as it boots to get the loader prompt. Note   You may need to press the selected key combination multiple times before your screen displays the loader prompt. Example: loader> Step 2 Configure the interface to receive the kickstart image through TFTP. Enter the local IP address and subnet mask for the system at the loader> prompt, and press  Enter . Example: loader> set ip 10.104.105.136 255.255.255.0 Specify the IP address of the default gateway. Example: loader> set gw 10.104.105.1 Boot the kickstart image file from the required server. Example: loader> boot tftp://10.104.10
Post a Comment
Read more